China wholesaler China Factory OEM Service Screw CNC Machining Stainless Steel Transmission Shaft drive shaft yoke

Product Description

China Factory OEM Service Screw  CNC Machining Stainless Steel Transmission Shaft

Our factory specializing in making precision CNC machining part and assembly services for OEM and ODM part Our company has 1 set CNC gantry machine,15 sets CNC machine center,2 sets CNC lathe,8 sets CNC milling etc. Our material usually processed are Aluminum,Stainless steel,Brass,Carton Steel,Free cutting steel,Tooling Steel,Enginnering Plastic.
Product Description

precision cnc parts for camera in aluminum,brass, stainless steel material
processed by casting and CNC lathe
with machining finish, anodize oxidation finishing

Our Experience

We are with rich experience in processing of various materials, 
such as AL6061/7075, SUS303, 304, ESD225/420, DERLIN, SI36H, SS440C,17-4 ph, Ceramic, Carbide,Engineering Plastics such as PEEK and so on. In addition, we can also provide some special processing, special heat treatment and special electroplating, surface treatment for customer, such as optical grinding, honing, precision EDM specialshaped processing, carburizing, nitriding, vacuum heat treatment and cryogenic treatment, the hard anodized aluminum, steel blue, electrolytic polishing, nickel sank without electricity,silver-plated, gold-plated and so on.

 

Material: Copper,iron,aluminum,stainless steel,alloy steel,plastic.etc.Which we usually processing are as following show.
 

Aluminum 6061-T6,6063-T5,7075-T6,2011,2017,2571,5052,5083,6082,etc
Stainless steel SUS303, SUS304, SUS316,SUS316L, SUS430, SUS440, SUS420, SUS201,etc.
Steel Q235,20#,45#,Cr12,SKD11,A2,40Cr,16Mn,Cr12Mov,etc.
Carbon Steel 1571,1015,1571,1030,1035,1040,1045,etc.
Free Cutting Steel 1211,12L13,12L14,1215,etc.
Brass C11000,C15710,C12000,C26000(HPb59),C36000(C26800), C38500(HPb58, C27200(CuZn37), C28000(CuZn4),etc.
Plastic PVC,PE, PMMA,POM,Telfon,Delrin,PEEK,Nylon, ABS,PC,PP,PA6,PA66,etc.

 

Processing method:

1 CNCTurning
2 Auto lathe
3 3/4 axis CNC milling
4 CNC turning and milling compound processing
5 Grinding
6 Fast/midium/slow wire EDM
7 Wire-Cutting
8 Welding
9 Cast
10 Taping
11 Drilling

 

Surface treatment:

1 Zinc/nickel/chrome plating
2 hot galvanized
3 painting
4 powder coating
5 Anodize Oxidation, or with colors:like silver, blue, red, etc.
6  plating,silver-plated,Gold-plated,etc
7 polishing
8 electrolytic polishing
9 sank without electricity nickel
etc etc.

Our Services

  Our Services: Providing whole set complete accessories  processing, and also can assembled as customers’ requirement. Help you to save time,save labor,and save worry.
 

Quality

100% inspection before shipping for sample, sampling inspectio as the customer’s requirements for mass production.

Packaging & Shipping

Packing:As per our standard,if you have requirement, please tell me.

Our satandard packing: products wrapped with bubble, or in 1 piece/PP bag, wooden box or  parper carton, 

Company Information

HangZhou CZPT Precision Machining Co.,Ltd specialized in processing all kinds of precision parts, products widely used in Machining,Electronic,Automatic line, Automobile,Plane,Computer, Communication,Medical equipment, Design, Manufacturing, fixture,mold and some other industries.

 

Our Equipments

 

Prcessing Equipements

 

No. Eqipment name Quantity(sets) Precision Max processing size
1 CNC Planer type milling machine 1 0.005mm 2000*1300mm
2 4 Axis CNC milling machine 1 0.005mm D30mm to 40mm
3 CNC milling machine 14 0.005mm 800*450mm,600*350mm
4 Milling machine 14 0.02mm 780*350mm
5 CNC lathe machine 3 0.002mm D450*500mm
6 Lathe machine 2 0.01mm D360*750
7 Plane grinding maching 4 0.005mm 350*200*150mm
8 High speed WEDM 4 0.02mm 700*400*500
9 Low speed WEDM 2 0.01mm  
10 Hydraulic sheet metal bending machine 1   VC67Y-30T*1600mm,                  Liter pressure:300kN

 

 

The main test equipment

 

Number Equiment name Specification Quantity(set) Brand Origin
1 Electronic Altimeter 0-600mm 1 TESR Switzerland
2 Image Measurement Instrument 250*150mm 1 JATEH China
3 Rockwell Apparatus HR-150A 1 Shidai China
4 Surface roghness comparison Specimens   1 HangZhou China

Why Choose us?

1:Factory directly, with good quality and reasonable price.
2:For processing: We have rich experience in processing many kinds of machining parts with many kinds of materials.
Highly welcome Non-standar, standard, OEM, customized machining parts.
Parts can with high precision, tolerance can reach to +0.005mm, surface Roughness can reach to Ra0.8-3.2
3:For assembling: We have professional assembling department, because our factory also make equipments, could provide assembling and degugging service for you.
4:For quality: We are with ISO standard, and with PND production and managment system, every part will be test and check before shipping.
5:For MOQ: our MOQ is 1 piece.
6:For production time: Fast lead time. Samples:5-7days, mass production:12-15days.
7:For Logo: customized Logo is available by laser marking.
8:For service: We processing parts according artwork strictly, and provide afterservice is parts different with artwork.
 

FAQ

 1: Do you have stock goods?

We only make products according customers order, don’t have stock products, all processing according to customers’ requirements.

 

2: What artwork form we need to provide?

 

Answer:2D Processing artwork in PDF,JPG,cdr or others, or DWG, STP also can use, but if need 2D processing artwork to calculate price.

As different product has different usage, we need according your processing artwork or sample  to process.And for different products need different material,processing skill, please provide us your processing artwork or samples to help us to calculate detail price  for you.

Detail view

Other machining products


Our factory

 

Condition: New
Certification: CE, RoHS, GS, ISO9001
Standard: DIN, ASTM, GOST, GB, JIS, ANSI
Customized: Customized
Material: Aluminum
Application: Metal Recycling Machine, Metal Cutting Machine, Metal Straightening Machinery, Metal Spinning Machinery, Metal Processing Machinery Parts, Metal forging Machinery, Metal Engraving Machinery, Metal Drawing Machinery, Metal Coating Machinery, Metal Casting Machinery
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

air-compressor

What is a driveshaft and how much does it cost to replace one?

Your vehicle is made up of many moving parts. Knowing each part is important because a damaged driveshaft can seriously damage other parts of the car. You may not know how important your driveshaft is, but it’s important to know if you want to fix your car. In this article, we’ll discuss what a driveshaft is, what its symptoms are, and how much it costs to replace a driveshaft.

Repair damaged driveshafts

A damaged driveshaft does not allow you to turn the wheels freely. It also exposes your vehicle to higher repair costs due to damaged driveshafts. If the drive shaft breaks while the car is in motion, it may cause a crash. Also, it can significantly affect the performance of the car. If you don’t fix the problem right away, you could risk more expensive repairs. If you suspect that the drive shaft is damaged, do the following.
First, make sure the drive shaft is protected from dust, moisture, and dust. A proper driveshaft cover will prevent grease from accumulating in the driveshaft, reducing the chance of further damage. The grease will also cushion the metal-to-metal contact in the constant velocity joints. For example, hitting a soft material is better than hitting a metal wall. A damaged prop shaft can not only cause difficult cornering, but it can also cause the vehicle to vibrate, which can further damage the rest of the drivetrain.
If the driveshaft is damaged, you can choose to fix it yourself or take it to a mechanic. Typically, driveshaft repairs cost around $200 to $300. Parts and labor may vary based on your vehicle type and type of repair. These parts can cost up to $600. However, if you don’t have a mechanical background, it’s better to leave it to a professional.
If you notice that one of the two drive shafts is worn, it’s time to repair it. Worn bushings and bearings can cause the drive shaft to vibrate unnecessarily, causing it to break and cause further damage. You can also check the center bearing if there is any play in the bearing. If these symptoms occur, it is best to take your car to a mechanic as soon as possible.
air-compressor

Learn about U-joints

While most vehicles have at least one type of U-joint, there are other types available. CV joints (also known as hot rod joints) are used in a variety of applications. The minor axis is shorter than the major axis on which the U-joint is located. In both cases, the U-joints are lubricated at the factory. During servicing, the drive shaft slip joint should be lubricated.
There are two main styles of U-joints, including forged and press fit. They are usually held in place by C-clamps. Some of these U-joints have knurls or grooves. When selecting the correct fitting, be sure to measure the entire fitting. To make sure you get the correct size, you can use the size chart or check the manual for your specific model.
In addition to lubrication, the condition of the U-joint should be checked regularly. Lubricate them regularly to avoid premature failure. If you hear a clicking sound when shifting gears, the u-joint space may be misaligned. In this case, the bearing may need to be serviced. If there is insufficient grease in the bearings, the universal joint may need to be replaced.
U-joint is an important part of the automobile transmission shaft. Without them, your car would have no wheeled suspension. Without them, your vehicle will have a rickety front end and a wobbly rear end. Because cars can’t drive on ultra-flat surfaces, they need flexible driveshafts. The U-joint compensates for this by allowing it to move up and down with the suspension.
A proper inspection will determine if your u-joints are loose or worn. It should be easy to pull them out. Make sure not to pull them all the way out. Also, the bearing caps should not move. Any signs of roughness or wear would indicate a need for a new UJ. Also, it is important to note that worn UJs cannot be repaired.

Symptoms of Driveshaft Failure

One of the most common problems associated with a faulty driveshaft is difficulty turning the wheels. This severely limits your overall control over the vehicle. Fortunately, there are several symptoms that could indicate that your driveshaft is failing. You should take immediate steps to determine the cause of the problem. One of the most common causes of driveshaft failure is a weak or faulty reverse gear. Other common causes of driveshaft damage include driving too hard, getting stuck in reverse gear and differential lock.
Another sign of a failed driveshaft is unusual noise while driving. These noises are usually the result of wear on the bushings and bearings that support the drive shaft. They can also cause your car to screech or scratch when switching from drive to idle. Depending on the speed, the noise may be accompanied by vibration. When this happens, it’s time to send your vehicle in for a driveshaft replacement.
One of the most common symptoms of driveshaft failure is noticeable jitter when accelerating. This could be a sign of a loose U-joint or worn center bearing. You should thoroughly inspect your car to determine the cause of these sounds and corresponding symptoms. A certified mechanic can help you determine the cause of the noise. A damaged propshaft can severely limit the drivability of the vehicle.
Regular inspection of the drive shaft can prevent serious damage. Depending on the damage, you can replace the driveshaft for anywhere from $500 to $1,000. Depending on the severity of the damage and the level of repair, the cost will depend on the number of parts that need to be replaced. Do not drive with a bad driveshaft as it can cause a serious crash. There are several ways to avoid this problem entirely.
The first symptom to look for is a worn U-joint. If the U-joint comes loose or moves too much when trying to turn the steering wheel, the driveshaft is faulty. If you see visible rust on the bearing cap seals, you can take your car to a mechanic for a thorough inspection. A worn u-joint can also indicate a problem with the transmission.
air-compressor

The cost of replacing the drive shaft

Depending on your state and service center, a driveshaft repair can cost as little as $300 or as high as $2,000, depending on the specifics of your car. Labor costs are usually around $70. Prices for the parts themselves range from $400 to $600. Labor costs also vary by model and vehicle make. Ultimately, the decision to repair or replace the driveshaft will depend on whether you need a quick car repair or a full car repair.
Some cars have two separate driveshafts. One goes to the front and the other goes to the back. If your car has four wheel drive, you will have two. If you’re replacing the axles of an all-wheel-drive car, you’ll need a special part for each axle. Choosing the wrong one can result in more expensive repairs. Before you start shopping, you should know exactly how much it will cost.
Depending on the type of vehicle you own, a driveshaft replacement will cost between PS250 and PS500. Luxury cars can cost as much as PS400. However, for safety and the overall performance of the car, replacing the driveshaft may be a necessary repair. The cost of replacing a driveshaft depends on how long your car has been on the road and how much wear and tear it has experienced. There are some symptoms that indicate a faulty drive shaft and you should take immediate action.
Repairs can be expensive, so it’s best to hire a mechanic with experience in the field. You’ll be spending hundreds of dollars a month, but you’ll have peace of mind knowing the job will be done right. Remember that you may want to ask a friend or family member to help you. Depending on the make and model of your car, replacing the driveshaft is more expensive than replacing the parts and doing it yourself.
If you suspect that your drive shaft is damaged, be sure to fix it as soon as possible. It is not advisable to drive a car with abnormal vibration and sound for a long time. Fortunately, there are some quick ways to fix the problem and avoid costly repairs later. If you’ve noticed the symptoms above, it’s worth getting the job done. There are many signs that your driveshaft may need service, including lack of power or difficulty moving the vehicle.

China wholesaler China Factory OEM Service Screw CNC Machining Stainless Steel Transmission Shaft   drive shaft yoke		China wholesaler China Factory OEM Service Screw CNC Machining Stainless Steel Transmission Shaft   drive shaft yoke
editor by CX 2023-09-01

Recent Posts

pto shaft

As one of leading pto shaft manufacturers, suppliers and exporters of mechanical products, We offer pto shaft and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of bush chains

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.