China Large Size Flange Cardan Shaft pto shaft carrier bearing

Merchandise Description

Telescopic flange lengthy cardan shaft Coupling(SWP-A)

SWP partition profile bearing the cross shaft universal coupling items: replacement of bearings for, SWP sort cardan layout bearing break up shaft bolt, suited for hoisting and conveying equipment and other hefty equipment, connecting 2 various axis transmission shaft, axis angle of A~F kind not more than ten degrees, the G type is not increased than 5 degrees.

♦Product Structure

♦Basic Parameter And Major Dimension

Type Tactical diameter
D
mm
 
Nominal torque
Tn
kN·m
Fatique torque Tf
kN·m
Axis
angle
β
(°)
Stretch
size
S
mm
Dimension(mm) Rotary
inertia
kg·m2
 
Mass
kg
Lmin D1
js11
D2
H7
D3 E E1 B×h h1 L1 n-d Lmin Increase
100
Lmin Improve
a hundred
SWP160A a hundred and sixty sixteen 8 ≤10 50 660 a hundred and forty 95 114 15 4 20×12 6 85 six-13 .thirteen .0059 47 2.one
SWP180A 180 twenty ten ≤10 sixty 752 a hundred and fifty five one hundred and five 121 fifteen four 24×14 7 95 six-fifteen .22 .0072 60 2.three
SWP200A 200 31.five 16 ≤10 70 823 one hundred seventy five one hundred twenty five 17 seventeen 5 28×16 eight 110 eight-15 .37 .0114 81 three.4
SWP225A 225 40 20 ≤10 seventy six 933 196 one hundred thirty five 152 twenty 5 32×18 9 a hundred thirty eight-seventeen .sixty three .5710 109 6.six
SWP250A 250 sixty three 31.5 ≤10 eighty 978 218 a hundred and fifty 168 25 five 40×25 12.five one hundred thirty five eight-19 one.02 .0407 147 7.three
SWP285A 285 ninety forty five ≤10 one hundred 1133 245 one hundred seventy 194 27 seven 40×30 fifteen a hundred and fifty 8-21 2.seventeen .0702 241 nine.4
SWP315A 315 140 sixty three ≤10 one hundred ten 1250 280 185 219 32 7 40×30 fifteen 170 10-23 three.86 .1144 322 twelve.
SWP350A 350 a hundred and eighty 90 ≤10 120 1380 310 210 245 35 eight 50×32 sixteen 185 ten-23 6.sixty six .1663 428 13.6
SWP390A 390 250 112 ≤10 120 1495 345 235 273 40 8 70×36 eighteen 205 10-twenty five eleven.53 .2695 566 eighteen.
SWP435A 435 355 160 ≤10 a hundred and fifty 1710 385 255 299 forty two 10 80×40 twenty 235 16-28 21.eighty one .3645 932 twenty.
SWP480A 480 450 224 ≤10 a hundred and seventy 1910 425 275 351 forty seven 12 90×45 22.five 265 sixteen-31 38.04 .7571 1294 28.
SWP550A 550 710 315 ≤10 a hundred ninety 2135 492 320 402 50 12 100×45 22.5 290 16-31 61.28 one.1842 1744 35.seven
SWP600A 600 a thousand five hundred ≤10 210 3580 544 380 450 fifty five 15 90×55 27.5 360 22-34 ninety eight.63 one.7159 2330 forty.5
SWP640A 640 1250 630 ≤10 230 2685 575 385 480 60 15 100×60 30 385 18-38 167.sixty seven two.3080 3153 forty eight.3

·Observe:L is the duration of set up,including the price of S/Z shrinkage.

♦Product Present

♦Cardan Shaft Kinds
We can offer you SWP,SWC,WSD,WS universal coupling as following:
Welded shaft type with size payment / expansion joint

Brief kind with size compensation / expansion joint

Short sort without having duration compensation / expansion joint

Extended type without having duration compensation / expansion joint

Double flange with size compensation / expansion joint

Long sort with large length payment / big expansion joint

Super Limited sort with size compensation / expansion joint

♦Other Products List

Transmission Machinery 
Parts Title
Design
Universal Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

♦Our Company
Our company materials diverse types of products. Substantial high quality and affordable cost. We adhere to the principle of “top quality initial, support very first, constant improvement and innovation to satisfy the buyers” for the administration and “zero defect, zero grievances” as the top quality aim. To best our services, we provide the items with excellent top quality at the reasonable cost.

Welcome to personalize products from our factory and remember to provide your style drawings or contact us if you want other needs.

♦Our Providers
1.Layout Solutions
Our layout group has experience in cardan shaft relating to item style and growth. If you have any needs for your new merchandise or desire to make additional improvements, we are right here to provide our support.

2.Merchandise Services
uncooked resources → Cutting → Forging →Rough machining →Shot blasting →Heat treatment method →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

three.Samples Process
We could create the sample in accordance to your prerequisite and amend the sample continually to meet up with your require.

4.Analysis & Development
We normally study the new needs of the market and produce the new product when there is new automobiles in the industry.

5.Good quality Control
Every single stage must be particular take a look at by Professional Personnel according to the normal of ISO9001 and TS16949.

FAQ
Q 1: Are you trading organization or maker?
A: We are a professional manufacturer specializing in manufacturing
various collection of couplings.

Q 2:Can you do OEM?
Of course, we can. We can do OEM & ODM for all the clients with personalized artworks of PDF or AI format.

Q 3:How prolonged is your supply time?
Usually it is twenty-30 times if the goods are not in stock. It is according to quantity.

Q 4: Do you offer samples ? Is it free or added ?
Sure, we could provide the sample but not for free of charge.Really we have a very very good price basic principle, when you make the bulk buy then price of sample will be deducted.

Q 5: How extended is your warranty?
A: Our Guarantee is 12 thirty day period under normal circumstance. 

Q 6: What is the MOQ?
A:Typically our MOQ is 1pcs.

Q 7: Do you have inspection processes for coupling ?
A:one hundred% self-inspection just before packing.

Q 8: Can I have a visit to your manufacturing facility ahead of the get? 
A: Positive,welcome to visit our factory.

Q 9: What is your payment?
A:1) T/T. 2) L/C 

Get in touch with Us
World wide web: huadingcoupling
 
 
Add: No.1 HangZhou Road,Chengnan park,HangZhou Metropolis,ZheJiang Province,China

US $74.85-149,700
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Shaft Hole: as Your Requirement
Torque: as Your Requirement
Bore Diameter: as Your Requirement
Speed: as Your Requirement
Structure: Flexible

###

Customization:

###

Type Tactical diameter
D
mm
 
Nominal torque
Tn
kN·m
Fatique torque Tf
kN·m
Axis
angle
β
(°)
Stretch
length
S
mm
Size(mm) Rotary
inertia
kg·m2
 
Mass
kg
Lmin D1
js11
D2
H7
D3 E E1 B×h h1 L1 n-d Lmin Increase
100
Lmin Increase
100
SWP160A 160 16 8 ≤10 50 660 140 95 114 15 4 20×12 6 85 6-13 0.13 0.0059 47 2.1
SWP180A 180 20 10 ≤10 60 752 155 105 121 15 4 24×14 7 95 6-15 0.22 0.0072 60 2.3
SWP200A 200 31.5 16 ≤10 70 823 175 125 17 17 5 28×16 8 110 8-15 0.37 0.0114 81 3.4
SWP225A 225 40 20 ≤10 76 933 196 135 152 20 5 32×18 9 130 8-17 0.63 0.0290 109 6.6
SWP250A 250 63 31.5 ≤10 80 978 218 150 168 25 5 40×25 12.5 135 8-19 1.02 0.0407 147 7.3
SWP285A 285 90 45 ≤10 100 1133 245 170 194 27 7 40×30 15 150 8-21 2.17 0.0702 241 9.4
SWP315A 315 140 63 ≤10 110 1250 280 185 219 32 7 40×30 15 170 10-23 3.86 0.1144 322 12.0
SWP350A 350 180 90 ≤10 120 1380 310 210 245 35 8 50×32 16 185 10-23 6.66 0.1663 428 13.6
SWP390A 390 250 112 ≤10 120 1495 345 235 273 40 8 70×36 18 205 10-25 11.53 0.2695 566 18.0
SWP435A 435 355 160 ≤10 150 1710 385 255 299 42 10 80×40 20 235 16-28 21.81 0.3645 932 20.0
SWP480A 480 450 224 ≤10 170 1910 425 275 351 47 12 90×45 22.5 265 16-31 38.04 0.7028 1294 28.0
SWP550A 550 710 315 ≤10 190 2135 492 320 402 50 12 100×45 22.5 290 16-31 61.28 1.1842 1744 35.7
SWP600A 600 1000 500 ≤10 210 3580 544 380 450 55 15 90×55 27.5 360 22-34 98.63 1.7159 2330 40.5
SWP640A 640 1250 630 ≤10 230 2685 575 385 480 60 15 100×60 30 385 18-38 167.67 2.3080 3153 48.3

###

Transmission Machinery 
Parts Name
Model
Universal Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS
US $74.85-149,700
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Shaft Hole: as Your Requirement
Torque: as Your Requirement
Bore Diameter: as Your Requirement
Speed: as Your Requirement
Structure: Flexible

###

Customization:

###

Type Tactical diameter
D
mm
 
Nominal torque
Tn
kN·m
Fatique torque Tf
kN·m
Axis
angle
β
(°)
Stretch
length
S
mm
Size(mm) Rotary
inertia
kg·m2
 
Mass
kg
Lmin D1
js11
D2
H7
D3 E E1 B×h h1 L1 n-d Lmin Increase
100
Lmin Increase
100
SWP160A 160 16 8 ≤10 50 660 140 95 114 15 4 20×12 6 85 6-13 0.13 0.0059 47 2.1
SWP180A 180 20 10 ≤10 60 752 155 105 121 15 4 24×14 7 95 6-15 0.22 0.0072 60 2.3
SWP200A 200 31.5 16 ≤10 70 823 175 125 17 17 5 28×16 8 110 8-15 0.37 0.0114 81 3.4
SWP225A 225 40 20 ≤10 76 933 196 135 152 20 5 32×18 9 130 8-17 0.63 0.0290 109 6.6
SWP250A 250 63 31.5 ≤10 80 978 218 150 168 25 5 40×25 12.5 135 8-19 1.02 0.0407 147 7.3
SWP285A 285 90 45 ≤10 100 1133 245 170 194 27 7 40×30 15 150 8-21 2.17 0.0702 241 9.4
SWP315A 315 140 63 ≤10 110 1250 280 185 219 32 7 40×30 15 170 10-23 3.86 0.1144 322 12.0
SWP350A 350 180 90 ≤10 120 1380 310 210 245 35 8 50×32 16 185 10-23 6.66 0.1663 428 13.6
SWP390A 390 250 112 ≤10 120 1495 345 235 273 40 8 70×36 18 205 10-25 11.53 0.2695 566 18.0
SWP435A 435 355 160 ≤10 150 1710 385 255 299 42 10 80×40 20 235 16-28 21.81 0.3645 932 20.0
SWP480A 480 450 224 ≤10 170 1910 425 275 351 47 12 90×45 22.5 265 16-31 38.04 0.7028 1294 28.0
SWP550A 550 710 315 ≤10 190 2135 492 320 402 50 12 100×45 22.5 290 16-31 61.28 1.1842 1744 35.7
SWP600A 600 1000 500 ≤10 210 3580 544 380 450 55 15 90×55 27.5 360 22-34 98.63 1.7159 2330 40.5
SWP640A 640 1250 630 ≤10 230 2685 575 385 480 60 15 100×60 30 385 18-38 167.67 2.3080 3153 48.3

###

Transmission Machinery 
Parts Name
Model
Universal Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

Power Take-Off (PTO) Shafts

Power take-off (PTO) shafts are used on many types of machines, including jet aircraft. They are typically semi-permanently mounted to a marine or industrial engine, and are powered by a drive shaft. The drive shaft also powers secondary implements and accessories. Depending on the application, accessory drives may also be used in aircraft. There are four main types of PTO units used in jet aircraft.

Power take-off (PTO) shaft

Shaft CollarThe power take-off (PTO) shaft of a tractor can be controlled to operate in one of two modes: automatic and manual. Automatic mode operates when the PTO shaft starts turning and is automatically engaged when the power lift is raised by actuating the lift lever 9. Manual mode operates when the lift lever is not raised.
The manual mode allows for manual adjustments. A retaining band 12 may be adjusted arcuately about PTO shaft S with an axial center parallel to the axis of the PTO shaft S. The retaining band may be secured by conventional over center clamps. The retaining band 12 may also be adjusted arcuately about pin or bolt 30.
Power take-off (PTO) shaft safety retainers are used to prevent unintended disconnection of the PTO shaft. The safety retainers comprise a stationary openable band that circumscribes the PTO shaft near the connection with driven machinery. The band is preferably offset from the axis of the PTO shaft.
While the PTO shaft is a convenient way to transfer mechanical power to farm implements, there are several inherent hazards associated with using it improperly. Accidental disconnections of the PTO shaft pose a significant risk for the operator. A disconnect can cause the PTO shaft to whip around the driven machinery, potentially causing injury.
Power take-off shaft entanglements can be devastating to the limbs trapped in them, requiring amputation in some cases. In addition to being dangerous, the PTO shafts must be fully guarded to prevent contact with the ground. A farmer must never get too close to an operating PTO shaft to protect their own safety.

Types

There are several different types of PTO shafts available to suit various applications. They can vary in size and number of splines. Each standard has a specific speed range and is designed to fit a variety of implements. For example, there are German and Italian types of PTO shafts.
The type of PTO shaft you choose will determine the maximum load that can be safely transferred. Depending on the type, the rate at which the PTO clutch engages will be different. For example, a lower-density PTO shaft will engage at a slower rate than a higher-density PTO shaft, while a higher-density shaft will be more tolerant of higher loads.
The primary function of a PTO shaft is to secure equipment to the tractor or other agricultural equipment. These parts often feature safety shields on both ends. They are also made in the same shape as the secondary shaft. The front shaft is wider than the secondary shaft, which allows the secondary shaft to fit inside. However, during movement, pieces of the PTO shaft can collapse, making them less safe.
PTO shafts are expensive and easy to steal, so make sure to protect your investment. Make sure the PTO shaft has guards to protect it from thieves. There are two types of PTO shafts: the external and the internal PTO yokes. Internal PTO shafts have an internal PTO yoke, while external PTO shafts use a universal joint. There is also a safety chain and shield on the external PTO shaft.
Depending on the application, you can choose between several different kinds of PTO shafts. Some types of PTO shafts have multiple splines, which can increase the torque transmitted. For applications requiring accuracy and precision, you may want to use a parallel keyed shaft.

Connections

Shaft CollarA PTO shaft has two parts: an input and an output. The input portion of a PTO adapter shaft has a smaller diameter, and the output portion has a larger diameter. Both are connected by splines. These splines have tapered outer ends. The first bore 25 has a first frustoconical wall, while the second bore has a second frustoconical wall.
One of the most common causes of PTO shaft failure is a poorly adjusted clutch. Another common cause is improper lubrication of the PTO shaft’s wide angle joints. PTO shafts should be lubricated at least once every eight hours. If you fail to do this, you risk premature ware and reduced life expectancy.
When a PTO shaft is installed in a tractor, the tractor must be connected to the implement using a coupler frame. The coupler frame has a PTO adapter mounting flange that engages with the PTO stub shaft. The coupler frame can move to accommodate the PTO adapter shaft, and the PTO adapter shaft can pivot and slide with the coupler frame.
When a PTO shaft fails, it can result in damage to the tractor and implement. Identifying the cause will help you fix the problem. Constant compression of the PTO shaft can damage the connecting shafts and connections. This could damage the tractor or implement, resulting in expensive repairs. When this happens, it is important to cut or shorten the shaft to reduce the risk of damage.
PTO shaft 24 extends rearward from tractor 10 and is connected to the front universal joint 28 and first end of variable-length splined drive shaft 32. The shaft is connected to a drive mechanism 36 on a mobile work implement 34. This drive mechanism may be mechanical, hydraulic, or a combination of both.

Safety

It is very important for every person using a tractor to understand the safety of PTO shafts. PTOs can be extremely dangerous, and without the correct shielding, they can cause serious injury. It can also be very dangerous if someone accidentally steps on or falls on one while the machine is operating. This is why it is important for everyone using a tractor to read the manufacturer’s manual and follow the safety guidelines for PTO shafts. Moreover, PTOs must only be used for the purpose intended.
PTO safety should be the number one priority for every operator. A small child was tragically killed when he became entangled with a spinning PTO shaft. His father tried to pull him out of the shaft, but was unable to do so. His clothing, which was near the spinning shaft, caught on the PTO and dragged him into it. His body was thrown around the shaft several times, and he sustained injuries to his leg, right arm, and head.
The PTO shaft is an important part of a tractor, and is used to secure the equipment. It is usually secured by safety shields on both ends. There are several kinds of safety shields. One type is a shield that is attached to the front of the PTO shaft. Another type is a shield that rotates freely on its bearings.
Power takeoffs are common on most small and compact tractors, construction machinery, and other equipment. They rotate to provide the drive for the equipment. However, the PTO shaft is very dangerous because it can easily catch something that gets too close to it. Moreover, loose items can also get tangled around the PTO shaft.

Maintenance

Shaft CollarOne of the most important things to do in order to keep your PTO shaft in top condition is to keep it properly greased. This can be done by using a grease gun or a hand pump. It is important to keep the grease fresh and apply it in the appropriate amounts depending on how much you use the PTO. It is also important to separate the primary and secondary shafts and remove any debris from them.
It is also important to check the spline threads on your PTO on a periodic basis. This is important because some signs of dry shafts are not always immediately apparent. Similarly, spline threading and corrosion can occur behind the scenes and go undetected. Proper PTO maintenance is a vital part of safe and efficient operation.
A damaged or worn drive shaft will prevent your car from turning freely, leaving you exposed to higher repair bills. In addition, it will drastically affect the performance of your car. A broken drive shaft can even result in a crash. You should take your vehicle to a mechanic as soon as you notice any of these problems.
Fortunately, most PTO-driven equipment is equipped with a shear pin to prevent collisions and prevent damage to the gearbox and shaft. It should also be replaced regularly to prevent excessive wear. Long bolts pose a risk of entanglement and can easily catch clothing or gloves. For safety reasons, it is important to disengage the PTO when not in use.
Another thing to do is to keep the PTO shields clean. They must be regularly rotated and tested. Always ensure that your drawbar is properly configured for your machine. This prevents stressing or separating the driveline.
China Large Size Flange Cardan Shaft     pto shaft carrier bearingChina Large Size Flange Cardan Shaft     pto shaft carrier bearing
editor by czh 2023-01-27

Recent Posts

pto shaft

As one of leading pto shaft manufacturers, suppliers and exporters of mechanical products, We offer pto shaft and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of bush chains

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.